2018 Honda CRF250R

On Sale
$6,299.00
Was $7,899.00


Stock Image

Stock Image

New/Used
New
Availability
In Stock
Location
Haden's Motorsports Center, Inc.
Primary Color
RED
VIN
JH2ME1239JK001225
Stock #
001225
Title
Clean
Condition
Excellent
Year
2018
Manufacturer
Honda
Model
CRF250R

Overview

Description

Honda’s fuel economy estimates are based on EPA exhaust emission measurement test procedures and are intended for comparison purposes only. Your actual mileage will vary depending on how you ride, how you maintain your vehicle, weather, road conditions, tire pressure, installation of accessories, cargo, rider and passenger weight, and other factors.



Suggested Retail Price (SRP) excludes destination charge. Visit powersports.honda.com to view applicable destination charge amount.



Winning starts with the holeshot.



What does it feel like to win? What does it sound like? What does it take to win? Motocross isn’t a sport for the timid. When you show up at that starting gate, both you and your bike need to be ready to grab the holeshot and hang on to it until the checkered flag. That’s why Honda is determined to give you the best bike in the 250 class, the all-new 2018 CRF250R. Major upgrades everywhere, including a new DOHC engine featuring increased power and higher redline, give you the advantages you need and make the CRF250R an absolute holeshot machine.

Performance Features
  • Higher Valve Lift: Not only are the CRF250R’s valves bigger, but they lift higher too, from 9.2mm to 10.5mm intake and from 8.4mm to 9.5mm exhaust. That’s a huge boost, and really helps the CRF250R breathe for more power.
  • Larger Valve Diameters: We bumped up the valve diameter on both the intake and exhaust side, from 30.5mm to 33mm on the intakes and from 25mm to 26mm for the exhaust. Combined with the higher lift, the twin-cam CRF250R flows a lot more, especially at high revs when you’re wicking it up.
  • Higher Redline: With our better-breathing DOHC design and the new big-bore/short-stroke engine, the CRF250R’s rev limit jumps an additional 900 rpm. Peak power and peak torque are also up, and the horsepower peak is increased by another 2000 rpm.
  • More Power: Who doesn’t want more power? With the 2018 CRF250R, you get both more peak power and more peak torque, especially on the top end. Hold that throttle open and head for the first turn—the CRF250R is designed to win that critical holeshot drag race.
Handling Features
  • Lower Rear Shock Mount: By lowering the rear shock mount on the frame, the new CRF250R benefits from both a lower center of gravity (cg) as well as gaining chassis stability.
  • Showa Spring Fork: The 49mm Showa® fork features a conventional spring design that helps increase the CRF250R’s front-suspension precision, handling and feel. The 39mm piston diameter and 25mm rod diameter guarantee a plush feel and supple action.
  • Shorter Swingarm: Shortening the CRF250R’s swingarm helps make it lighter, and also helps give the bike better rear-wheel traction, important considering how much more power you have on tap. The new design also reduces the bike’s unsprung mass.
  • Dunlop MX3S Tires: Developed using Dunlop’s latest “block-on-block” design technology, the CRF250R’s MX3S tires give excellent feedback and are a perfect complement to the CRF250R’s frame and suspension.
  • 260mm Front Brake: The CRF250R’s large front-brake disc measures a whopping 260mm. You get great brake feel and a wave pattern that cuts down on weight. Front and rear brake-disc guards are part of the package too.
Engineering Features
  • DOHC Engine Layout: The 2018 CRF250R uses an all-new double-overhead-cam (DOHC) engine layout with a unique finger-follower rocker design. Together with the rest of the engine’s new architecture (bore and stroke, intake tract, piston, and more), you get more power and a higher redline.
  • Titanium Intake and Exhaust Valves: Light is right when it comes to a high-revving engine’s reciprocating masses. That’s why the CRF250R gets titanium intake and exhaust valves. Plus, the valve angle is reduced to a super-narrow 20.5 degrees (included). Ovalized valve springs and long-wearing Diamond-Like Carbon (DLC) treated finger rockers complete the package.
  • Downdraft Intake and Exhaust Layout: The new DOHC cylinder-head design let our engineers straighten out the CRF250R’s intake and exhaust tracts. The intake is shorter and just about arrow straight, and the exhaust flows more efficiently too. No athlete’s going to win a sprint if he tries to run while holding his breath, and it’s no different with your bike’s engine. You’ll experience both more power and better throttle response.
  • Big Bore/Short Stroke: By changing the CRF250R’s bore from 76.8mm to 79mm, and shortening the stroke from 53.8mm to 50.9mm, our engineers have created a high-revving engine with plenty of room for large valves. The new engine breaths and revs—the two keys to making power in the motocross world.
  • All-New Dual-Exhaust System: The CRF250R’s all-new dual-exhaust system is light, compact, and positioned close and low in the frame to take weight off the rear end and bring more mass to the bike’s center for improved handling. It also allows for more airflow, and that equals added horsepower.
  • Electric Start: Big news for 2018—the new CRF250R gets an effortless electric starter. Convenient and lightweight, it’s a huge deal if you need to restart a stalled bike in the heat of battle.
  • Total Air Management: Total air management means complete attention to how efficiently air gets through the intake, through the head, and out the exhaust. Eliminate losses here, and you make more power everywhere. And the best part? It’s free horsepower—you just need a bike with smart design.
  • Bridged-Box Piston: A first for a Honda MX bike, the new CRF250R features a bridged-box piston design developed on our factory racebikes. Why? The reinforcing structure between the skirts and the wrist-pin bosses lets this big-bore piston retain a light, strong construction and helps enable the CRF250R’s high redline.
  • “H” Section Crank: Look closely at the CRF250R’s crankshaft profile and you’ll see its “H” cross-section design. What’s up with that? Just like a structural “I” beam in an aircraft wing or a skyscraper, it boosts strength and cuts weight over a conventional crank’s shape. We shaved off over ¾ of a pound—a big deal when you consider this part spins at over 14,000 rpm!
  • Gradual Pipe-Bend Radius: Notice how the CRF250R’s dual exhaust pipes make gradual, large-radius bends out of the head, then flow straight back to the mufflers with no abrupt angle changes. Getting the exhaust out of the engine—while still maintaining a tuned exhaust length, is the key to power, while the pipes’ low mass and twin-silencer design optimize the CRF250R’s center of mass for superior handling.
  • New Clutch Design and Materials: We totally overhauled the new CRF250R’s clutch design. The clutch basket is completely new, and the clutch plates use two different types of friction material. Why? The new clutch can handle the increased power of the new engine without being any larger—in fact, we even shaved off 200 grams—nearly half a pound of rotating weight!
  • Lithium-Iron-Phosphate Battery: Like the rest of the CRF250R, the bike’s new Lithium-Iron-Phosphate battery is both super light and high performing. In fact, it weighs less than half the weight of a conventional lead-acid battery.
  • Engine Mode Select Button: This simple handlebar-mounted button lets you dial in engine power delivery character with a push of your thumb. Choose between Standard, Smooth and Aggressive, depending on track conditions.
  • Titanium Fuel Tank: Every gram counts on a bike in the 250 class, which is why we made the switch to a titanium fuel tank on the 2018 CRF250R. Light and strong, it’s also thinner than our previous plastic unit, freeing up more space and helping to centralize fuel mass.
  • Engine Oil Scavenge Pump: Deep in the engine, there’s a special oil scavenge pump. While you may never see it, it helps keep the CRF250R’s overall design compact.
  • Shared Engine/Gearbox Lubrication: The 2018 CRF250R uses a new, shared engine/transmission oiling design. Why? Combining the two systems shaves weight and helps make the engine more compact, especially when it comes to placing the right-side cam drive and the clutch so close together.
Comfort Features
  • Smooth Styling: Blending the new CRF250R’s body panels does more than just make the bike look smooth, fast, and stylish. It also helps you move around on the bike while riding. Nothing wrong with smooth, fast, and stylish, though.
  • “In Molded” Graphics: With the all the time you’ll be spending in victory circle, you need to look your best. The new CRF250R has you covered. Our “in molded” graphics look great, and stay looking good longer.
  • New Rear Subframe: The 2018 CRF250R’s new subframe uses extruded rear members that produce a 20-percent reduction in weight. Since that weight comes off the top of the bike, it also contributes to the CRF250R’s lower center of gravity.
  • Flat Seat/Tank Junction: The 2018 CRF250R features a flat seat/tank junction, including a titanium fuel tank. The superior ergonomics make it easier to move forward and back on the bike, increasing your control.
Engine
  • Engine Type: 249cc liquid-cooled single-cylinder four-stroke
  • Bore And Stroke: 79.0mm x 50.9mm
  • Induction: Programmed fuel-injection system (PGM-FI); 46mm throttle bore
  • Ignition: Full transistorized
  • Compression Ratio: 13.9:1
  • Starter: Electric with lithium-iron-phosphate battery
  • Valve Train: DOHC, four-valve; 33mm intake, titanium; 26mm exhaust, titanium
Drive Train
  • Transmission: Constant-mesh 5-speed return; manual
  • Final Drive: #520 Chain; 13T/48T
  • Clutch: Multiplate wet (5 springs)
Chassis/Suspension/Brakes
  • Front Suspension: 49mm fully adjustable leading-axle inverted telescopic Showa SPG coil-spring fork; 12.0 in. travel
  • Rear Suspension: Pro-Link system; fully adjustable Showa single shock; 12.4 in. travel
  • Front Brake: Single 260mm hydraulic disc
  • Rear Brake: Single 240mm hydraulic disc
  • Front Tire: Dunlop Geomax MX3S 80/100-21 with tube
  • Rear Tire: Dunlop Geomax MX3S 120/90-19 with tube
Dimensions
  • Rake: 27 deg. 22 min. (Caster Angle)
  • Trail: 116mm (4.6 in.)
  • Wheelbase: 58.3 in.
  • Seat Height: 37.8 in.
  • Curb Weight: 238 lb. (Includes all standard equipment, required fluids and a full tank of fuel–ready to ride)
  • Fuel Capacity: 1.6 gal.
  • Ground Clearance: 12.9 in.
  • Length: 85.9 in.
  • Width: 32.6 in.
  • Height: 50.2 in.
Other
  • Available Colors: Red
  • Model ID: CRF250R

Specs

Engine

Engine Type
Single-cylinder four-stroke
Displacement
249cc
Bore and Stroke
79.0mm x 50.9mm
Cooling
Liquid
Compression Ratio
13.9:1
Fuel System
Programmed fuel-injection system (PGM-FI); 46mm throttle bore
Ignition
Full transistorized

Chassis

Front Suspension
49mm fully adjustable leading-axle inverted telescopic Showa SPG coil-spring fork; 12.0 in. travel
Front Brakes
Single 260mm hydraulic disc
Front Tire
Dunlop Geomax MX3S 80/100-21 with tube
Rear Suspension
Pro-Link system; fully adjustable Showa single shock; 12.4 in. travel
Rear Brakes
Single 240mm hydraulic disc
Rear Tire
Dunlop Geomax MX3S 120/90-19 with tube

Dimensions

Dry Weight
Curb Weight: 238 lb.
Fuel Capacity
1.6 gal.
Wheelbase
58.3 in.
Ground Clearance
12.9 in.
Seat Height
37.8 in.
Trail
116mm (4.6 in.)
Rake
27 deg. 22 min. (Caster Angle)

Transmission

Transmission
Constant-mesh 5-speed return; manual
Final Drive
#520 Chain; 13T/48T

General

Colors
Red

Related Products